Here it is folks:
Sparkks Racing HD Independent Fuel Pump Relay Setup. Constructed using Top Quality 12 gauge (AWG) Wire for Power Supply and Ground.
* 7Ft Power Cable from Relay to Battery (+)
*50 Amp Capable with a 30 amp fused power wire direct from Battery.
*Hd Switching relay 50 Amp Capable.
*Used on many high HP Honda/Acura vehicles with BIG Fuel Pumps but can be used on any make and model or setup with no issues.
This can be used in a universal application when High current and power supply is needed for big Fuel Pumps that demand a heavier gauge wire and relay. Running a big fuel pump on stock small gauge wiring is a big NO at high rpm the demand from pump goes up and the stock wiring can NOT handle the load.
This kit is complete connects from battery positive to relay, from relay to Fuel Pump (+), from ground to Fuel Pump (-), and the relay trigger connects to the stock fuel pump power wire. Heavy Duty ring terminals are installed for ease of installation, High temp nylon sleeve on all wiring, Heat shrink on ends to make for a very clean setup.
What you connect?
- Main Battery 12v (+) Ring Terminal pre-installed on cable.
- 12v(+) from relay to your fuel pump (+)
- Ground to your fuel pump (-)
- 12v trigger from stock fuel pump (+) wire to our wire on relay.
All wiring is supplied and ready to go very easy to setup and takes a lot of guesswork and headaches out of your big power fuel pump setup.
If you have questions please ask! I am more than willing to help you.
***FREE SHIPPING IN USA!!***